Trickstuff Exzentriker Bottom Bracket

Unrivalled: the eccentric bottom bracket from Trickstuff

Trickstuff would not be Trickstuff without dreamy parts like the eccentric bottom bracket. This is the first and only eccentric bottom bracket that can be mounted in normal BSA bottom bracket shells and can accommodate any conventional 24 mm bottom bracket shaft (e.g. Shimano Hollowtech II and many others). It is used for infinitely variable adjustment of the chain tension on single-speeds or hub gears (e.g. Rohloff) and makes chain tensioners or adjustable dropouts unnecessary. The eccentric bottom bracket cradles the bottom bracket shaft between two soft-turning special ball bearings, which are distinguished from conventional bearings by their stainless steel and special grease, offering an almost infinitely long service life. The eccentric is also patent-protected, and, naturally, dreamed and conceived in the Black Forest!

Technical Information:

Cam Body Material:

aluminium 7075 T6, anodised

Threaded Sleeve Material:

steel, high-strength and corrosion resistant

Clamp Material:

stainless steel bolt & nut

Type:

BSA

Shell Width:

68 mm (with spacer rings) / 73 mm (without spacer rings)

Axle:

24 mm

Adjustment Range:

+/- 3 mm

Bearings:

two Phil Wood ball bearings, stainless, special grease

Compatibility:

• all continuous 24 mm axles (e.g. Shimano Hollowtech II)
• with adapter sleeve also 22/24 mm GXP spindles
• not for BB30, square taper, tune Sixpack axles

Features:

• adjustment range +/- 3 mm
• used for infinitely variable adjustment of the chain tension on single-speed or hub gear bikes
• makes chain tensioners or dropouts superfluous
• bottom bracket shaft cradled between two soft-turning Phil Wood ball bearings
• eccentric is protected by patent
• mounting the bottom bracket requires the mounting tool

Manufacturer Numbers:

black:

BCZBEXXSS0000S

Note: With conventional triple mountain bike cranks, the bases for mounting the small chainring collide with the outer contour of the Exzentriker housing.The remedy for this is to use single cranks (e.g. Shimano Alfine or similar), dual racing bike cranks or current dual or single MTB race cranks or file off pedestals.

Contents:

• 1 x Trickstuff Exzentriker bottom bracket
• 3 x Trickstuff spacers
• 1 x Halflink chain link (7-/8-/9-speed) 6.6 mm

Order Together:

• Trickstuff mounting tool for eccentric bottom bracket

Optional Accessories:

• Trickstuff GXP Sleeve