Cane Creek AngleSet ZS44/28.6 - EC56/40 Tapered Headset Kit

Use:
Designed for 1 1/8" upper and 1.5" lower head tubes combined with tapered forks.

Specifications:

Top Cup:

1 1/8" dimension

Bottom Cup:

1.5" dimension

Steerer Tube:

tapered 1 1/8" , 1.5"

Design:

Zero Stack (ZS), External Cup (EC)

Technical Information:

Material:

Aluminium 7075

Bearings:

cartridge

Bearing Seat:

45° x 36° (top)

Features:

• angle adjustable headset made of 7075 aluminium
• independent of the head tube length
• self-adjusting mechanism for precise pretensioning
• setting options: +/- 0.5°, +/- 1°, +/- 1.5°
• turning the offset cup by 180° creates a flatter or steeper head tube angle
• offset headset cup must be pressed in in alignment with the frame axis
• it is necessary to change the offset headset cup in order to change the angle

Standardized Headset Identification System (S.H.I.S.):

In order to clarify and bring uniformity to a sea of headset standards, manufacturers Acros, Cane Creek, Hope, Race Face, Reset Racing and Ritchey have agreed upon using a shared nomenclature, which will likely include more participating companies in the future. This system takes into account a combination of frame and fork dimensions. Both the top and bottom parts of the headset are marked by two alphanumeric identifiers. The first identifier indicates the type of headset (External Cup, Zero Stack, Integrated) and head tube diameter. The second identifier - separated from the first by a backslash - indicates the diameter of the steerer tube. When referring to a complete headset, the specifications of both top and bottom parts must be combined.

EC:

Bearings contained within headset cups that are located outside of the frame (External Cup)

ZS:

Bearings contained within pressed-in headset cups where the cup and bearings rest inside the frame (Zero Stack)

IS:

Bearings that fit directly into a bonded or machined interface that is integrated into the frame (Integrated)

Models:

ZS44/28.6 - EC56/40

• Design: zero stack (ZS), external cup (EC)
• Steerer Tube: 28.6 mm
• Steerer Tube Crown Race: 40 mm
• Top Head Tube (Frame Inner Diameter): 44 mm
• Lower Head Tube (Frame Inner Diameter): 56 mm
• Bearing Angle: 45°
• Top Stack Height: 13 mm
• Bottom Stack Height: 14 mm
• Adjustment Angle: +/- 0.5°, +/- 1°, +/- 1.5°

Manufacturer Number:

BAA0504K

Contents:

• 1 x Cane Creek 0° headset cup
• 1 x Cane Creek 0.5° headset cup
• 1 x Cane Creek 1.0° headset cup
• 1 x Cane Creek 1.5° headset cup
• 2 x Cane Creek cartridge bearings
• 2 x Cane Creek gimbals
• 1 x Cane Creek compression ring
• 1 x Cane Creek 1.5" crown race (40 mm)
• 1 x Cane Creek top cap
• 1 x Cane Creek Ahead top cap
• 1 x Cane Creek 1 1/8" star nut
• 1 x Cane Creek hex bolt