Cannondale Moterra Neo Carbon LT 2 E-Mountain Bike

The Cannondale Moterra Neo Carbon LT 2 E-Mountain Bike for sustained enduro fun

The Moterra Neo Carbon LT 2 from Cannondale is a full-suspension E-mountain bike with 29" in the front and 27.5" in the rear that likes to hurtle down enduro trails with 165 mm of suspension travel at the rear. The Bosch motor boosts your own power by up to 340%, but offers you a natural riding experience. The battery is also impressive, with 750 Wh you won't miss out on any extra hills. A Shimano XT/SLX drivetrain and RockShox suspension elements, including a steel coil shock, stand for reliable performance. With four pistons, the MT5 from brake specialists Magura reliably provide deceleration when it's needed. Thanks to the Proportional Response approach, which adjusts frame geometry, linkage design and shock tune separately depending on size, you will feel as if the Moterra Neo was tailor-made for you.

Guidelines for Replacing E-bike Components:

Before you replace components on your e-bike, please read through the guidelines for component replacement for CE-marked e-bikes/pedelecs with pedal assistance.

Information regarding the return of batteries and electrical equipment:

Information on the return and disposal of used batteries and electrical equipment can be found here. For information regarding the return of used e-bike batteries, please contact our customer service.

Specifications:

Application:

Enduro, All Mountain

Wheel Size:

Scaled Sizing

Front Travel:

170 mm

Rear Travel:

165 mm

Sizes:

S, M, L, XL

Front Triangle Material:

carbon

Rear Triangle Material:

aluminium

E-Motor:

Type:

mid-drive motor

Motor Type:

Bosch Performance Line CX

Pedal Assist (max.):

25 km/h

Power:

250 W

Battery Type:

Bosch Power Tube

Capacity:

750 Wh

Display:

Bosch Kiox

Components:

Frame:

Cannondale Moterra Neo carbon main frame, SmartForm C1 aluminium rear triangle, Proportional Response Tuned, internal cable routing, 12 x 148 mm

Fork:

RockShox ZEB Select, Charger RC, DebonAir, 15 x 110 mm (Boost), 51 mm offset

Stem:

Cannondale 2, 6061 aluminium, 35 mm, 0°

Handlebars:

Cannondale 3 Riser, 6061 aluminium, 25 mm Rise, 8° Backsweep, 5° Upsweep, 800 mm

Grips:

fabric FunGuy

Rear Shock:

RockShox Deluxe Coil Select+, 2-Position Adjust, Rebound, 450 lbs (S, M), 500 lbs (L, XL)

Remote System:

none

Headset:

Acros Integrated Sealed Bearing, Tapered

Seatpost:

Cannondale DownLow Dropper, internal cable routing, 31.6 mm, travel: 100 mm (S), 125 mm (M, L), 150 mm (XL)

Saddle:

fabric Scoop Shallow Sport, steel rails

Crank:

FSA Bosch e-bike, 55 mm chainline, 160 mm, 34-tooth

Pedals:

none

Brakes:

SRAM Code, SRAM brake rotors, 200 mm (front) / 200 mm (rear)

Shift Lever:

Shimano SLX, 12-speed

Rear Derailleur:

Shimano XT, 12-speed

Cassette:

Shimano SLX, 10-51-tooth, 12-speed

Chain:

Shimano SLX, 12-speed

Rims:

WTB ST i30 TCS, 32 hole, tubeless ready

Spokes:

stainless steel

Front Hub:

Formula, 15 x 110 mm

Rear Hub:

Shimano MT410, 12 x 148 mm

Front Tyre:

Maxxis Assegai, 29 x 2.6" , 3C, EXO+, tubeless ready

Rear Tyre:

Maxxis DHR II, 27.5 x 2.6" , 3C, EXO+, tubeless ready

Approved For:

Weight Limit:

138 kg (rider + gear)

Rotor Size (max.):

220 mm

Tyre Size (max.):

29 x 2.6" (front, also rear in M-XL), 27.5" x 2.6" (rear)

Chainrings:

1x

Features:

• Proportional Response geometry concept: chainstay lengths, frame design and damping behaviour are matched to frame size
• powerful Bosch Performance Line CX motor with natural riding characteristics
• powerful removable battery
• 55 mm chainline
• SRAM UDH universal derailleur hanger
• with holder for kickstand (not included)
• pre-assembled lamp cable

Geometry:

S:

Recommended Height:

157 cm - 165 cm

Stack:

623 mm

Reach:

426 mm

Seat Tube Length:

400 mm

Top Tube Length:

580 mm

Effective Top Tube Length:

540 mm

Head Tube Length:

105 mm

Chainstay Length:

452 mm

Wheelbase:

1217 mm

Bottom Bracket Height:

356 mm

BB Drop:

11 mm

Seat Tube Angle:

76.5°

Head Tube Angle:

64°

Standover Height:

763 mm

Stem Length:

45 mm

Handlebar Width:

800 mm

Crank Arm Length:

160 mm

M:

Recommended Height:

162 cm - 175 cm

Stack:

633 mm

Reach:

446 mm

Seat Tube Length:

460 mm

Top Tube Length:

602 mm

Effective Top Tube Length:

555 mm

Head Tube Length:

115 mm

Chainstay Length:

452 mm

Wheelbase:

1242 mm

Bottom Bracket Height:

356 mm

BB Drop:

11 mm

Seat Tube Angle:

76.5°

Head Tube Angle:

64°

Standover Height:

763 mm

Stem Length:

45 mm

Handlebar Width:

800 mm

Crank Arm Length:

160 mm

L:

Recommended Height:

172 cm - 182 cm

Stack:

642 mm

Reach:

476 mm

Seat Tube Length:

460 mm

Top Tube Length:

634 mm

Effective Top Tube Length:

585 mm

Head Tube Length:

125 mm

Chainstay Length:

452 mm

Wheelbase:

1276 mm

Bottom Bracket Height:

356 mm

BB Drop:

11 mm

Seat Tube Angle:

76.5°

Head Tube Angle:

64°

Standover Height:

767 mm

Stem Length:

45 mm

Handlebar Width:

800 mm

Crank Arm Length:

160 mm

XL:

Recommended Height:

180 cm - 195 cm

Stack:

651 mm

Reach:

511 mm

Seat Tube Length:

490 mm

Top Tube Length:

671 mm

Effective Top Tube Length:

621 mm

Head Tube Length:

135 mm

Chainstay Length:

452 mm

Wheelbase:

1315 mm

Bottom Bracket Height:

356 mm

BB Drop:

11 mm

Seat Tube Angle:

76.5°

Head Tube Angle:

64°

Standover Height:

777 mm

Stem Length:

45 mm

Handlebar Width:

800 mm

Crank Arm Length:

160 mm

Manufacturer Number:

C25552U

Shipping Notice:

The shipment is sent pre-assembled by a forwarding agent.
The delivery time is extended by 2-5 days, depending on the overall volume of orders.
For individual consultation, please contact our customer service team.

Contents:

• 1 x Cannondale Moterra Neo Carbon LT 2 29" E-Mountain Bike