DT Swiss FR 1500 Classic 30 Super Boost 6-Bolt Disc 27.5" Wheelset

DT Swiss FR 1500 Classic 30 Super Boost 27.5" wheels for freeride and DH - strong partners for new lines

The DT Swiss FR 1500 Classic 27.5 inch wheelset with Super Boost rear hub impresses in demanding gravity use thanks to its outstanding resilience, puncture resistance and low weight. Its secret is the 30 mm wide aluminium rim, which takes load distribution into account in extreme situations and thus improves handling. Compared to its predecessor FR 1950, its profile has been reinforced in certain areas to offer optimum impact resistance for freeride and downhill. In addition, the rim flanges are shaped to minimise the risk of tyre punctures. The use of fewer spokes on the front wheel - 28 double-butted J-Bend spokes compared to 32 on the rear wheel - reduces the weight of the wheelset, which benefits acceleration and reactivity. Central are the race-proven, lightweight 240 6-bolt disc hubs with Ratchet-EXP-36 freehub, known for its fast engagement and ease of maintenance. Test them yourself and you will see: Trying out new lines is even more fun with the DT FR 1500 Classic wheels.

Specifications:

Application:

Downhill, Enduro

Wheel Size:

27.5" (650B)

Tyre Type:

clincher tyre

Number of Spokes:

28 (front), 32 (rear)

Brake Type:

6-bolt disc (Boost)

Wheel Standard:

Boost (front), Super Boost (rear)

Tubeless System:

Tubeless Ready

Technical Information - Rim:

Type:

DT FR 1500 (FR 541)

Rim Flange:

with hook

Dimensions (ETRTO):

30-584

Inner Width:

30 mm

Outer Width:

35 mm

Depth:

21 mm

Valve Hole Diameter:

SV/Presta (6.5 mm)

Rim Material:

aluminium

Technical Information - Front Hub:

Type:

240 Classic

Over Locknut Dimension:

20 x 110 mm thru-axle

Bearings:

steel bearings

Body Material:

aluminium

Technical Information - Rear Hub:

Type:

240 Classic

Over Locknut Dimension:

12 x 157 mm thru-axle

Bearings:

steel bearings

Body Material:

aluminium

Freehub Body Material:

aluminium

Freehub Body:

Ratchet EXP 36

Technical Information - Lacing:

Front Lacing Pattern:

3-cross

Rear Lacing Pattern:

3-cross

Spoke Type:

DT Competition / double-butted (2.0 - 1.8) / J-bend

Spoke Size:

278 mm/279 mm (front l/r), 275 mm/274 mm (rear l/r)

Spoke Material:

stainless steel

Nipple Type:

DT Pro Lock Squorx Pro Head, 2.0 mm (2.3 mm FG)

Nipple Size:

15 mm (length)

Nipple Material:

aluminium

Approved For:

Weight Limit:

140 kg (system weight)

Air Pressure (max.):

see user manual (Tire Pressure and Dimension)

Recommended Tyre Width:

see user manual (Tire Pressure and Dimension)

Features:

• 27.5" wheelset designed for gravity use with 20 mm Boost front wheel and Super Boost rear wheel hub
• highly resilient aluminium rims, specifically reinforced in certain areas
• optimised rim flanges for 17 % better puncture resistance compared to FR 1950 Classic
• 7 % weight saving compared to FR 1950 Classic due to fewer spokes on the front wheel
• precise handling for difficult, unknown lines
• lightweight 240 hub set with low-maintenance, fast freehub
• cold-forged spokes, double-butted for lower weight

Technology:

Intended use: Category 5
Suitable for use on extremely steep and rough terrain with very large jumps or drops at speeds above 40 km/h. Extremely good bike handling skills required. May also be used in bike parks and on DH trails. After each ride, due to the very high load, it is imperative to check for possible damage in order to prevent failure on the next ride. Possibly shortened service life due to extreme use.

Pro Lock
The nipple thread is coated with two-component adhesive to increase the durability of the wheels. It can still be re-trued several times without any problems, but the adhesive strength decreases slightly. The connection between the spoke and nipple cannot loosen by itself.

Ratchet EXP
A ratchet and a threaded ring are integrated into the hub. This reduces the number of components required, resulting in less wear and tear and a lower weight. In addition, the heavy-duty and reliable ratchet system can be easily and quickly maintained. The no-tool concept plays a decisive role, as it allows the freehub to be replaced without any tools. The freehub has two ratchets which engage simultaneously. This means that the contact surface is large and the point load is kept small, which relieves the material and allows the freehub to work particularly reliably and precisely.

Colour Info:

black:

• Rims: black with white, grey and red decals
• Hubs: black-grey-red
• Spokes: black
• Nipples: black

Models:

27.5" set (front 20x110 Boost + rear 12x157 Super Boost) SRAM XD:

Freehub:

SRAM XD

Gearing:

11-/12-speed

Manufacturer Numbers:

WFR1500BHEXSA21526 (front) + WFR1500OHDRSA21532 (rear)

Conversion Options:

A Shimano freehub (8- to 11-speed) is included.

Contents:

• 1 x DT Swiss FR 1500 Classic 30 Super Boost 6-bolt disc 27.5" wheelset (front and rear wheel)
• 1 x DT Swiss Shimano 11-speed freehub body
• 2 x DT Swiss tubeless valves, 18 - 25 mm
• 2 x DT Swiss Tubeless Tape rim tape rolls, 32 mm