Enduro Bearings Angular Contact Ball Bearing 3802 15 mm x 24 mm x 7 mm

Maximum number of balls for maximum load capacity: the 3802 LLU MAX bearing from Enduro Bearings

MAX bearings are characterised by a 35 to 40 % higher load capacity than standard radial bearings. For 20 years Enduro Bearings has been manufacturing them specifically for use on mountain bike shocks. As its name indicates, MAX bearings are fitted with the maximum possible number of balls.
The 3802 MAX bearing is an angular contact ball bearing with balls in a double row, which further increases the static load capacity.

Specifications:

Dimensions (Inner x Outer x Width):

15 mm x 24 mm x 7 mm

Designation:

3802

Models:

Type 1:

Design:

Angular contact ball bearing

Tolerance:

ABEC 3 / ABEC 1

Recommended Use:

Suspension pivots, shocks

Inner Race Material:

steel (52100)

Outer Race Material:

steel (52100)

Ball Material:

steel

Seals:

LLU

Basic static load rating:

4.2 kN (940 lbs)

Manufacturer Number:

3802LLUMAX

Features:

• Angular contact ball bearing with a 15° angle, balls in double row
• MAX = maximum number of balls, without cage or partitions
• 35 % higher load carrying capacity than standard bearings, turn less easily
• race grooves made of carbon-chrome steel alloy, heat and triple cold treated (down to -190° C), minimum hardness Rockwell HRC 62, polished
• LLU: Seal type with double lip, in a groove in the inner race; particularly resistant to dirt and dust due to increased pressure, 90% grease filling rate (Almagard Extra High Pressure Grease)
• chrome steel balls 10th degree = circularity is 10/1,000,000"
• Level 1 rating from the Annular Bearing Engineer's Committee (ABEC) in terms of noise, manufacturing tolerances correspond to level 3

Contents:

• 1 x Enduro Bearings 3802 15 mm x 24 mm x 7 mm ball bearing