Favero Assioma Uno Power Meter Pedals

The Favero Assioma Uno power meter pedals - it's the facts that count

The Assioma Uno power meter pedals by Favero, unlike the Assioma Duo, perform a one-sided power measurement on the left leg. Torque efficiency and pedal stroke are only determined on the left side and you do not get any information about the right-left balance. The pedal's ground-breaking technology provides ultra-precise and reliable wattage readings, allowing you to redefine your goals. Based on hard facts, not just estimates, you'll get more out of your pedal strokes and make your training more efficient than ever.
The Assioma Uno can be installed as easily as normal pedals and quickly transferred from one bike to another. Communication with your smartphone or bike computer is wireless via Bluetooth or ANT+. As an additional feature, which previous versions did not have, is the continuous release hardness adjustment from 8 to 20 Nm.
Favero Electronics has over 30 years of experience in the field of electronic sports equipment and works closely with athletes. The Assioma Uno pedals, for example, have been extensively tested by the UCI Team Bardiani-CSF and successfully tried out in tough racing conditions.
And if a one-sided measurement one day should not be enough for you: Upgrading from Uno to Duo is possible at any time.

Information regarding the return of batteries and electrical equipment:

Information on the return and disposal of used batteries and electrical equipment can be found here.

Specifications:

Application:

Road, Triathlon & Time Trial

Type:

clipless pedals with a power meter (left)

Pedal System:

Favero

Compatibility:

Look Kéo

Technical Information:

Body Material:

Composite

Axle Material:

stainless steel (AISI 630 H900)

Bearings:

cartridge

Height:

10.5 mm

Pedal Centre to Crank Arm Distance:

54 mm

Tolerance:

+/-1 percent

Power Source:

lithium-ion battery, integrated

Battery Life:

approx. 50 hours

Data Collected:

current power (0-3000 watts), current cadence (30-190 rpm), torque efficiency (left), round pedal (left), IAV Cycling Dynamics (Power Phase, Rider Position)

Waterproof:

IP67

Data Transfer:

ANT+, Bluetooth

Approved For:

Weight Limit:

120 kg total weight

Compatibility:

• compatible with all Road cranks (9/16" -20 tpi thread), use spacer if necessary
• can be combined with round and oval chainrings
• compatible with all bike computers and smartphones with an ANT+ PWR (Bike Power) profile (CT + PO) or Bluetooth with a CPP profile
• Assioma App available in the App Store for iOS and Android (one-time activation, firmware updates, crank arm length adjustment, charge status display, information on new functions)
• other apps based on data sent via ANT+ or Bluetooth like Zwift, The Sufferfest, Strava, Rouvy, Trainerroad etc.
• recommended cleats: Favero, Look Kéo

Features:

• exact, reproducible, consistent measurements (one-sided, left only)
• calibrated by manufacturer, no manufacturer maintenance required (manual zero offset)
• 8 strain gauges around the axle
• magnetic pin charging contact prevents damage (no critical openings)
• charging status warning signal 8 hours before battery is depleted
• simplified assembly without special tools (hex wrench)
• quick change from one bike to another
• Automatic Temperature Compensation technology (ATC)
• built-in cadence sensor
• compact, no pedal strikes
• release hardness continuously adjustable from 8 to 20 Nm
• bi-component cover made of synthetic resin for greater robustness and watertightness
• sensor housing made of thick, shock-resistant polymer, fibreglass reinforced
• pedal body easily removed from pedal axle (with sensor)
• automatic stand-by after 5 minutes, automatic restart
• sensor diameter 33.5 mm
• 96 mm pedal width (including axle), 94 mm length
• sealed bearings (3 pcs.)
• 4 LEDs for status display
• permitted operating temperature: -10° C to +60° C
• permitted charging temperature: +5 to +40° C
• charging time: approx. 6 h (with completely discharged battery)
• Upgrade to Assioma Duo (measurement on both sides) possible if the right pedal is retrofitted with sensor
• Made in Italy

Note:

Only use the Favero or original Look Kéo cleats supplied. Other cleats are not compatible and may cause damage to the pedal. A minimum distance of 2 mm between the sole and the sensor is recommended (if necessary use a spacer).

Technology:

Assioma Uno Functionality
Power is measured in cycling by relating the force acting on the pedals to the pedalling speed (frequency): power = torque x cadence. Assioma is a pedal for Road cyclists, equipped with a sensor to measure the force applied to the pedal while pedalling. Assioma Uno integrates the cadence function and calculates the power of the left leg in real time. The left pedal sends its data to the bike computer. Favero power meter pedals provide an objective value which, unlike heart rate, cannot be influenced by external factors such as high temperatures, psychological stress, caffeine consumption, etc.

Manufacturer Number:

772-01

Contents:

• 1 x Favero Assioma pedal body, left
• 1 x Favero Assioma pedal body, right
• 1 x Favero Assioma pedal axle, left, incl. sensor
• 1 x Favero Assioma pedal axle, right
• 1 pair of Favero cleats 6° (red)
• 1 x USB cable w/ micro-USB plug, 2 m
• 1 x Favero Assioma magnet plug for charging
• 1 x charger
• 1 x EU plug adapter
• 1 x US plug adapter
• 1 x UK plug adapter
• 1 x AU plug adapter
• 1 x 8 mm hex key
• 4 x washers