Hope Conversion Kit for Pro 2 / Pro 2 Evo Hubs

For any type of fork or rear triangle: the Conversion Kit for Pro 2 / Pro 2 Evo Hubs by Hope

Hope conversion kits convert your Hope hubs to the corresponding installation standards and thus enable versatile use of the hubs.
In contrast to the Pro 2 hub, it is no longer necessary to change the axle on the Pro 2 Evo rear hub, so that here too it is only necessary to work with end caps.

Models:

Adapter for 6-bolt Front Hub
Type 1:

• Convertible to: front thru-axle 20 x 110 mm
• Base Model: front quick release 9 x 100 mm, thru-axle 12 x 100 mm, thru-axle 15 x 100 mm
• Compatibility: Pro 2 / Pro 2 Evo
• Manufacturer Number: HUB420

Type 2:

• Convertible to: front quick release 9 x 100 mm
• Base Model: front thru-axle 20 x 110 mm, thru-axle 15 x 100 mm
• Compatibility: Pro 2 / Pro 2 Evo
• Manufacturer Number: HUB419

Type 3:

• Convertible to: front thru-axle 15 x 100 mm
• Base Model: front quick release 9 x 100 mm, thru-axle 12 x 100 mm, thru-axle 20 x 110 mm
• Compatibility: Pro 2 / Pro 2 Evo
• Manufacturer Number: HUB441

Type 4:

• Convertible to: front thru-axle 9 x 100 mm ThruBolt
• Base Model: front quick release 9 x 100 mm, thru-axle 12 x 100 mm, thru-axle 15 x 100 mm, thru-axle 20 x 110 mm
• Compatibility: Pro 2 / Pro 2 Evo
• Manufacturer Number: HUB443

Type 5:

• Convertible to: front thru-axle 12 x 100 mm
• Base Model: front 9 x 100 mm quick release, 15 x 100 mm thru-axle
• Compatibility: Pro 2 Evo
• Manufacturer Number: HUB482

Type 6:

• Convertible to: front thru-axle 15 x 110 mm
• Base Model: front thru-axle 15 x 100 mm
• Compatibility: Pro 2 / Pro 2 Evo
• Manufacturer Number: HUB1009-14N

Manufacturer's note: The adapter is mounted on the right side of the front wheel. The wheel must then be re-trued so that it runs in the centre of the fork again.

Type 7:

• Convertible to: front thru-axle 15 x 110 mm SRAM Torque, thru-axle 15 x 100 mm SRAM Torque
• Base Model: front thru-axle 15 x 100 mm, quick release 9 x 100 mm, thru-axle 20 x 110 mm
• Compatibility: Pro 2 / Pro 2 Evo
• Manufacturer Number: HUB486

Manufacturer's note: The adapter is mounted on the front wheel. The wheel must then be re-trued so that it runs in the centre of the fork again.

Type 8:

• Convertible to: front thru-axle 15 x 100 mm SRAM Torque
• Base Model: front thru-axle 15 x 100 mm, quick release 9 x 100 mm, thru-axle 20 x 110 mm
• Compatibility: Pro 2 / Pro 2 Evo
• Manufacturer Number: HUB485

Type 27:

• Convertible to: 20 mm front hub thru-axle (20 x 110 mm)
• Base Model: front thru-axle 15 mm (15 x 110 mm)
• Compatibility: Pro 2 / Pro 2 Evo
• Manufacturer Number: HUB494

Adapter for 6-bolt Rear Hub

Type 9:

sold-out

• Convertible to: rear thru-axle 12 x 135 mm
• Base Model: rear quick release 10 x 135 mm
• Compatibility: Pro 2
• Manufacturer Number: HUB222

Type 10:

sold-out

• Convertible to: rear thru-axle 10 x 135 mm
• Base Model: rear quick release 10 x 135 mm, thru-axle 12 x 142 mm
• Compatibility: Pro 2
• Manufacturer Number: HUB223

Type 11:

sold-out

• Convertible to: rear bolt-on axle 10 x 135 mm
• Base Model: rear quick release 10 x 135 mm
• Compatibility: Pro 2
• Manufacturer Number: HUB224

Type 12:

• Convertible to: rear quick release 10 x 135 mm
• Base Model: rear thru-axle 10 x 135 mm, thru-axle 12 x 135 mm, thru-axle 12 x 142 mm
• Compatibility: Pro 2
• Manufacturer Number: HUB225

Type 13:

• Convertible to: rear thru-axle 12 x 142 mm Syntace
• Base Model: rear quick release 10 x 135 mm, thru-axle 10 x 135 mm, thru-axle 12 x 135 mm
• Compatibility: Pro 2
• Manufacturer Number: HUB231

Type 14:

• Convertible to: rear thru-axle 12 x 135 mm
• Base Model: rear quick release 10 x 135 mm
• Compatibility: Pro 2 Evo
• Manufacturer Number: HUB241

Type 15:

• Convertible to: rear thru-axle 10 x 135 mm
• Base Model: rear quick release 10 x 135 mm
• Compatibility: Pro 2 Evo
• Manufacturer Number: HUB239

Type 16:

• Convertible to: rear bolt-on axle 10 x 135 mm
• Base Model: rear quick release 10 x 135 mm
• Compatibility: Pro 2 Evo
• Manufacturer Number: HUB240

Type 17:

• Convertible to: rear quick release 10 x 135 mm
• Base Model: rear thru-axle 10 x 135 mm, thru-axle 12 x 135 mm, thru-axle 12 x 142 mm
• Compatibility: Pro 2 Evo / Pro 4
• Manufacturer Number: HUB238

Type 18:

• Convertible to: Rear thru-axle 12 x 142 mm Syntace, thru-axle 12 x 157 mm (only compatible with version 12 x 150 mm)
• Base model: rear quick release 10 x 135 mm, thru-axle 10 x 135 mm, thru-axle 12 x 135 mm, thru-axle 12 x 150 mm
• Compatibility: Pro 2 Evo / Pro 2 Evo Fatsno / Pro 4
• Manufacturer Number: HUB242

Adapter for Trial / Singlespeed

Type 19:

sold-out

• Convertible to: front / rear quick release
• Base Model: front / rear threaded axle 10 mm
• Compatibility: Pro 2 Evo Trial / Pro 2 EVO Singlespeed
• Manufacturer Number: HUB249

Type 20:

sold-out

• Convertible to: front / rear quick release
• Base Model: front / rear threaded axle 10 mm
• Compatibility: Pro 2 Trial / Pro 2 Singlespeed
• Manufacturer Number: HUB250

Type 21:

sold-out

• Convertible to: rear thru-axle 12 x 135 mm
• Base Model: rear threaded axle 10 mm
• Compatibility: Pro 2 Evo Trial / Pro 2 EVO Singlespeed
• Manufacturer Number: HUB252

Adapter for Fatsno:

Type 22:

sold-out

• Convertible to: front quick release 9 x 100 mm
• Base Model: front threaded axle 10 mm
• Compatibility: Pro 2 Evo Fatsno
• Manufacturer Number: HUB251

Type 23:

sold-out

• Convertible to: front thru-axle 15 x 135 mm
• Base Model: front quick release 9 x 135 mm
• Compatibility: Pro 2 Evo Fatsno
• Manufacturer Number: HUB474

Type 24:

sold-out

• Convertible to: front quick release 9 x 135 mm
• Base Model: front thru-axle 15 x 135 mm
• Compatibility: Pro 2 Evo Fatsno
• Manufacturer Number: HUB475

Type 25:

sold-out

• Convertible to: front thru-axle 15 x 142 mm
• Base Model: front 9 x 135 mm quick release, 15 x 135 mm thru-axle
• Compatibility: Pro 2 Evo Fatsno
• Manufacturer Number: HUB476

Type 26:

sold-out

• Convertible to: front thru-axle 15 x 150 mm
• Base Model: front quick release 9 x 135 mm, thru-axle 15 x 135 mm, thru-axle 15 x 142 mm
• Compatibility: Pro 2 Evo Fatsno
• Manufacturer Number: HUB480

Note:

Rear hubs with a 12 x 150 mm over locknut dimension cannot be converted with conversion kits because the hub shell is wider than standard versions.

Contents:

• 1 x Hope conversion kit for Pro 2 / Pro 2 Evo hubs