Marzocchi Bomber Z2 27.5" Boost Suspension Fork

The Bomber Z2 27.5" Boost Suspension Fork by Marzocchi returns

With the Marzocchi Bomber Z2 27.5" Boost suspension fork you have an all-rounder that gives you access to new trails, more airtime and more aggressive lines. In contrast to the Z1, a Rail damping system is used here. This is based on the Grip damping, but uses the stanchion tube itself as a cartridge. The chassis of the Bomber Z2 consists of 34 mm thick stanchions and a rigid M-shaped crown, which ensures maximum tyre clearance. On the 15 x 110 mm Boost axle, an improved thru-axle system with a newly developed quick-release is used.

Specifications:

Application:

All Mountain

Wheel Size:

27.5" (650B)

Suspension Type:

air

Travel:

100 mm, 120 mm, 140 mm, 150 mm

Steerer Tube:

1 1/8" - 1.5" tapered

Axle Type:

thru-axle with quick release lever (15 x 110 mm)

Brake Mount:

disc PM 6" (direct mount 160 mm)

Technical Information:

Offset:

44 mm

Steerer Tube Length:

258 mm

Steerer Tube Diameter (Stem):

28.6 mm

Steerer Tube Diameter (Crown Race):

40 mm

Axle to Crown:

492 mm (at 100 mm), 512 mm (at 120 mm), 532 mm (at 140 mm), 542 mm (at 150 mm)

Over Locknut Dimension:

110 mm

Stanchion Tube Diameter:

34 mm

Steerer Tube Material:

aluminium

Crown Material:

aluminium

Stanchion Tube Material:

aluminium

Lower Tube Material:

magnesium

Dropout Material:

aluminium

Adjustment Options:

Compression:

2-position Sweep Adjust (Open, Firm)

Rebound:

yes

Suspension Stiffness:

air pressure adjust

Remote:

no

Travel Adjustment:

no

Approved For:

Tyre Size (max.):

27.5 x 2.5"

Note:

From a tyre size of 27.5 x 2.5" , the tyre clearance must be checked with the fork fully compressed. It should be at least 8 mm measured from the fork crown.

Rotor Size (max.):

203 mm

Features:

• chassis with 34 mm uprights
• rigid lower tube unit with M-shaped crown for maximum tyre clearance
• improved 15QR x 110 Boost thru-axle system
• RAIL damping technology with Full Compression Sweep Adjust
• Float EVOL air spring with increased air chamber volume for smooth response
• black anodised stanchion tubes

Technology:

Float Air Spring:
Patented air transfer port system: The float air suspension system reduces the breakaway torque and thus offers a highly sensitive fork and full comfort even with small impacts. And that for every type of rider and at the most varied air pressure. Similar to the Float suspension rear shocks, the Float suspension system is characterised by a positive and a negative air chamber, which automatically balance each other out when riding.

Air Volume Spacers:
The Float air suspension of the forks can be finely adjusted by using volume spacers to adjust the suspension elements more progressively or less progressively. This allows the rider to fine-tune the suspension exactly to their needs.

Models:

matte black / 100 mm / 1.5" tapered / 15 x 110 mm / 44 mm:

• Suspension Travel: 100 mm
• Steerer Tube: 1 1/8" - 1.5" tapered
• Flow: 44 mm
• Brake Mount: Disc PM 6" (direct mount 160 mm)
• Axle Type: thru-axle with quick release lever (15 x 110 mm)
• Manufacturer Number: 912-01-070

matte black / 120 mm / 1.5" tapered / 15 x 110 mm / 44 mm:

• Suspension Travel: 120 mm
• Steerer Tube: 1 1/8" - 1.5" tapered
• Flow: 44 mm
• Brake Mount: Disc PM 6" (direct mount 160 mm)
• Axle Type: thru-axle with quick release lever (15 x 110 mm)
• Manufacturer Number: 912-01-069

matte black / 140 mm / 1.5" tapered / 15 x 110 mm / 44 mm:

• Suspension Travel: 140 mm
• Steerer Tube: 1 1/8" - 1.5" tapered
• Flow: 44 mm
• Brake Mount: Disc PM 6" (direct mount 160 mm)
• Axle Type: thru-axle with quick release lever (15 x 110 mm)
• Manufacturer Number: 912-01-068

gloss red / 140 mm / 1.5" tapered / 15 x 110 mm / 44 mm:

• Suspension Travel: 140 mm
• Steerer Tube: 1 1/8" - 1.5" tapered
• Flow: 44 mm
• Brake Mount: Disc PM 6" (direct mount 160 mm)
• Axle Type: thru-axle with quick release lever (15 x 110 mm)
• Manufacturer Number: 912-01-085

matte black / 150 mm / 1.5" tapered / 15 x 110 mm / 44 mm:

• Suspension Travel: 150 mm
• Steerer Tube: 1 1/8" - 1.5" tapered
• Flow: 44 mm
• Brake Mount: Disc PM 6" (direct mount 160 mm)
• Axle Type: thru-axle with quick release lever (15 x 110 mm)
• Manufacturer Number: 912-01-067

Contents:

• 1 x Marzocchi Bomber Z2 suspension fork
• 1 x Marzocchi 15 x 110 mm thru-axle
• 1 x star nut
• 3 x volume spacer