Maxxis Highroller II Double Down WT 27.5" Folding Tyre Set

Further development of the tried and tested: the Highroller II folding tyre set from Maxxis

The Highroller II is the result of consistent developments based on perhaps the most successful and best known DH tyre of the last decade. Compared to the Highroller, the Highroller II has a slightly different tread with modified sipes, a new edge profile and outwardly offset lugs.

Note from the manufacturer:
Maxxis strongly advises against the use of ammonia-based sealant. Ammonia has been proven to attack the carcass and can weaken it by up to 30% after only a few months, depending on the amount used.

Guidelines for replacing E-bike components:

Before you replace components on your e-bike, please read through the guidelines for component replacement for CE-marked e-bikes/pedelecs with pedal assistance.

Specifications:

Application:

All Mountain, Enduro

Type:

folding tyre

Tubeless System:

Tubeless Ready

Technical Information:

Rubber Compound:

3C MaxxTerra

Carcass:

120DD tpi

Sidewall:

Double Down

Models:

27.5x2.5

Dimensions:

27.5x2.5"

ETRTO:

63-584

Air Pressure (max.):

3.4 bars

Manufacturer Number:

1182

Technology:

3C MaxxTerra
At Maxxis, the 3C tread is moulded from 3 different rubber compounds in one piece and is not subsequently assembled from two strips. Therefore, the treads can be shaped exactly according to the requirements of the respective tyre model, thus optimising the riding characteristics.
The Freeride version of Maxxis 3C compounds. More grip and traction than the 3C MaxxSpeed compound, with less rolling resistance and longer durability than 3C MaxxGrip. The ideal Enduro and Freeride mixture, because it combines good rolling resistance uphill with great grip on the descent.

Double Down
Double Down tyres are constructed just like the downhill tyres from Maxxis. However, the two carcass layers, which are reinforced with a butyl inlay, each have 120 (instead of 60) tpi. Combined with the aramid bead, this makes the tyres considerably lighter.

Wide Trail (WT):
This design optimises the tread layout and tyre shape on today's modern wider rims. Traditional tyres are designed for narrower rims and become square on wider rims, resulting in a less than optimal performance. WT tyres are optimised for an inner rim width of 35 mm, but work excellently on all rims with an inner dimension of 30 - 40 mm. Concerns tyres with a width of 2.4" and above.

Tubeless Ready
Tubeless tyres have many advantages: you can ride with less air pressure. This gives better traction and reduces rolling resistance. And where there is no tube, the risk of punctures is reduced. Maxxis TR tyres are better prepared for mounting with sealant than other " tubeless ready" tyres. The bead of the Maxxis TR tyres is completely covered with a rubber layer like a real UST tubeless tyre. As a result, tubeless mounting is successful for all rims with standard dimensions even during the first inflation and with little liquid.

Contents:

• 2 x Maxxis Highroller II 27.5" folding tyres