Maxxis Highroller II WT 29" Folding Tyre

A further development of the tried and tested: the folding tyre Highroller II by Maxxis

The Highroller II is the result of consistent developments based on perhaps the most successful and best known DH tyre of the last decade. Compared to the Highroller, the Highroller II has a slightly different tread - with modified sipes, a new edge profile and outwardly offset lugs.

Note from the manufacturer:
Maxxis strongly advises against the use of ammonia-based sealant. Ammonia has been proven to attack the carcass and can weaken it by up to 30% after only a few months, depending on the amount used.

Guidelines for replacing E-bike components:

Before you replace components on your e-bike, please read through the guidelines for component replacement for CE-marked e-bikes/pedelecs with pedal assistance.

Specifications:

Application:

All Mountain, Freeride

Type:

folding tyre

Tubeless System:

Tubeless Ready

Technical Information:

Rubber Compound:

3C MaxxTerra

Carcass:

60 tpi

Sidewall:

EXO Protection

Models:

29x2.5

Dimensions:

29 x 2.5"

ETRTO:

63-622

Air Pressure (max.):

3.5 bars

Manufacturer Number:

1183

Technology:

3C MaxxTerra
At Maxxis, the 3C tread is moulded from 3 different rubber compounds in one piece and is not subsequently assembled from two strips. Therefore, the treads can be shaped exactly according to the requirements of the respective tyre model, thus optimising the riding characteristics.
The Freeride version of Maxxis 3C compounds. More grip and traction than the 3C MaxxSpeed compound, with less rolling resistance and longer durability than 3C MaxxGrip. The ideal Enduro and Freeride mixture, because it combines good rolling resistance uphill with great grip on the descent.

EXO Protection
This extremely cut and abrasion resistant material protects the sidewalls of various Maxxis MTB tyres. It is very tightly woven, light and very flexible. As a result, the performance of the tyres remains convincingly good.

Wide Trail (WT):

This design optimises the tread layout and tyre shape on today's modern wider rims. Traditional tyres are designed for narrower rims and become square on wider rims, resulting in a less than optimal performance. WT tyres are optimised for an inner rim width of 35 mm, but work excellently on all rims with an inner dimension of 30 - 40 mm. Concerns tyres with a width of 2.4" and above.

Tubeless Ready
Tubeless tyres have many advantages: you can ride with less air pressure. This gives better traction and reduces rolling resistance. And where there is no tube, the risk of punctures is reduced. Maxxis TR tyres are better prepared for mounting with sealant than other " tubeless ready" tyres. The bead of the Maxxis TR tyres is completely covered with a rubber layer like a real UST tubeless tyre. As a result, tubeless mounting is successful for all rims with standard dimensions even during the first inflation and with little liquid.

Contents:

• 1 x Maxxis Highroller II 29" folding tyres