Maxxis Minion DHR II Dual DH WT TR 29" Wired Tyre

Note from the manufacturer:
Maxxis strongly advises against the use of ammonia-based sealant. Ammonia has been proven to attack the carcass and can weaken it by up to 30% after only a few months, depending on the amount used.

Guidelines for Replacing E-bike Components:

Before you replace components on your e-bike, please read through the guidelines for component replacement for CE-marked e-bikes/pedelecs with pedal assistance.

Specifications:

Application:

Downhill

Ground Conditions:

Loose over Hard (5/6), Medium (6/6), Loose (5/6), Wet (1/6)

Type:

wired tyre

Tubeless System:

Tubeless Ready

Technical Information:

Rubber Compound:

Dual

Carcass:

60 tpi, 2 layers

Sidewall:

Downhill

Features:

• aggressive downhill tyre
• bevelled centre lugs for good acceleration
• paddle-shaped centre lugs provide strong braking traction
• wide side lugs offer extreme grip in curves

Models:

29x2.4

Dimensions:

29 x 2.4"

ETRTO:

61-622

Air Pressure (max.):

3.4 bars

Manufacturer Number:

1323

Technology:

Dual
For the Dual Compound, two different rubber compounds are processed into one tread strip. The arrangement of the compounds is planned individually according to the desired properties of Maxxis tyres.

Downhill Casing
Maxxis' Downhill Casing consists of two layers of 60 tpi each, enclosing a butyl insert in the sidewalls. The bead core of the TR version is easily foldable and covered with rubber. The finished carcass then has four layers on the sidewalls and six layers under the tread.

Wide Trail (WT)
This design optimises the tread layout and tyre shape on today's modern wider rims. Traditional tyres are designed for narrower rims and become square on wider rims, resulting in a less than optimal performance. WT tyres are optimised for an inner rim width of 35 mm, but work excellently on all rims with an inner dimension of 30 - 40 mm. Concerns tyres with a width of 2.4" and above.

Tubeless Ready
Tubeless tyres have many advantages: you can ride with less air pressure. This gives better traction and reduces rolling resistance. And where there is no tube, the risk of punctures is reduced. Maxxis TR tyres are better prepared for mounting with sealant than other " tubeless ready" tyres. The bead of the Maxxis TR tyres is completely covered with a rubber layer like a real UST tubeless tyre. As a result, tubeless mounting is successful for all rims with standard dimensions even during the first inflation and with little liquid.

Contents:

• 1 x Maxxis Minion DHR II 29" wired tyre