OneUp Components Oval Switch V2 Chainring

OneUp Components Oval Switch V2 chainring - with extended compatibility

The oval OneUp Components Switch V2 chainring for the Switch Direct Mount chainring system is, in contrast to previous Switch chainrings, also compatible with Shimano Hyperglide+ 12-speed chains. OneUp Switch has the advantage of an accelerated and greatly simplified chainring change. To complete the assembly in the shortest possible time, you only need a 4 mm hex key and do not even have to remove the crank. So before you tackle a steep trail, you can switch to a smaller chainring - faster than your friend can put on their cycling shoes! Due to their oval design, these Switch chainrings stand for traction, traction and again traction and are therefore especially suitable for uphill riding. They generate a constant torque at the rear wheel, which therefore doesn't skid out as easily. On the side, the Switch System also saves you money, because a OneUp Components Switch replacement chainring costs less than a new Direct Mount chainring.

Specifications:

Application:

Enduro, All Mountain

Mount:

OneUp Components Switch

Teeth:

28 T, 30 T, 32 T, 34 T

Gearing:

1x8-speed, 1x9-speed, 1x10-speed, 1x11-speed, 1x12-speed

Type:

12 % oval

Technical Information:

Material:

aluminium (7075-T6)

Compatibility:

• all 8-/9-/10-/11-speed chains
• SRAM Eagle 12-speed chains
• Shimano Hyperglide+ (HG +) 12-speed chains
• can only be used in conjunction with the Switch Carrier Spider

Features:

• chainring swap in under a minute (manufacturer specification)
• quick adaptation of the set-up to the conditions
• less cost for spare chainrings

-oval design: ultimate traction due to the harmonic torque on the rear wheel, optimal power transfer

• 115° Timing
• narrow-wide structure ensures the chain won't drop
• requires only a 4 mm hex key, cranks don't need to be removed

Note:

Loosen bolts with two turns, loosen and remove chainring with a 20° rotation. To fit the new Switch chainring, proceed in the opposite direction (the small bulge on the inner edge must be in line with the crank arm), 8 Nm tightening torque.

Manufacturer Numbers:

28 tooth:

1C0654BLK

30 tooth:

1C0655BLK

32 tooth:

1C0656BLK

34 tooth:

1C0657BLK

Contents:

• 1 x OneUp Components Switch V2 oval chainring