Pitlock Security Set M10 for Rohloff Solid Axles

Stainless steel anti-theft protection for your valuable Rohloff hub: The Solid Axle Security Set by Pitlock

Pitlock now also has the appropriate anti-theft protection for cyclists with Rohloff hubs in its range. Your valuable gearbox is thus protected from thieves and brings you safely home again.

If your bike has wide aluminium dropouts, Pitlock recommends securing only one side of the axle with Pitlock (single). Use the double set for securing the axle on both sides.

Note:

The protruding thread should protrude about 14 mm from the dropout.
The retaining ring requires a clearance (bearing surface) of 15 mm in the radius around the thread so that the Pitlock fastener can be securely installed.
If the protruding thread is too short, a stub axle with a long threaded axle is required (Rohloff part number 8235L).

Compatibility:

• Rohloff solid axles with an M10 x 1 thread
• SRAM DD3 solid axles with a M10 x 1 thread. Note: not compatible with past versions
• NuVinci n360 solid axles with an M10 x 1 thread

The Pitlock security set for Rohloff solid axles is only compatible with Rohloff solid axles M10 x 1 and is not approved for other solid axles.

Contents:

M10 single:

• 1 x Pitlock M10 x 1 lock for Rohloff solid axles
• 1 x Pitlock PIT key
• 1 x Pitlock code card

Double (M10 double):

• 2 x Pitlock M10 x 1 locks for Rohloff solid axles
• 1 x Pitlock PIT key
• 1 x Pitlock code card