RAAW Mountain Bikes Jibb 29" Fox ÖHLINS Frameset

The RAAW Mountain Bikes Jibb 29" Rolling frameset with suspension fork and shock

The Jibb frameset from RAAW Mountain Bikes for 29" is the perfect basis for a playful trail bike. In addition to the frame, you get a 36 Float GRIP2 Factory suspension fork and an ÖHLINS TTX 2 Air shock. The components are not pre-assembled. The suspension fork allows you to adjust high- and low-speed compression and rebound and comes with a low-friction Kashima coating. With the air spring shock, you benefit from an evenly decreasing leverage ratio with around 15% progression at the end of the travel.

As with the Madonna V2.2, RAAW now also use their own thru-axle system for the Jibb, which increases the stiffness and prevents the axle from loosening while riding. The design supports an active riding style, giving you confidence and control. The balanced geometry allows for a centralised riding position and provides sufficient traction. The same attention to detail is evident on the Jibb as on its sibling, the Madonna. For example, the brake mount on the Jibb is also a separate component. This means you don't need any extra adapters for different brake rotor sizes, and precision alignment of the brake caliper is not an issue. You can attach an accessory bag (not included) for tools and equipment to two threaded holes on the top tube, which lets you keep your most important items handy at all times. The required shock hardware is already included, so you don't need any bushings for assembly. A thru-axle, headset, seat clamp and protective sticker kit ensure that you have even more basics for your set-up on hand.

Specifications:

Application:

All Mountain, Enduro

Wheel Size:

29"

Front Travel:

150 mm

Rear Travel:

135 mm

Size:

S, M, L, XL

Front Triangle Material:

aluminium (6066-T6)

Rear Triangle Material:

aluminium (6066-T6)

Linkage Design:

four-pivot rear frame

Components:

Frame:

RAAW Mountain Bikes Jibb, 12 x 148 mm (Boost)

Fork:

Fox Racing Shox 36 Float GRIP2 Factory, HSC, LSC, HSR, LSR, 1.5 tapered, 44 mm headset, Disc PM7 (direct mount 180 mm), 15 x 110 mm (Boost)

Rear Shock:

ÖHLINS TTX 2 Air

Headset:

Acros ZS44/28.6 - ZS56/40

Note:

The individual components are not pre-assembled.

Technical Information - Frame:

Wheel Standard:

12 x 148 mm (Boost)

Axle Type:

12 mm thru-axle

Seatpost (Ø):

31.6 mm

Seatpost Clamp(Ø):

35 mm

Headset:

ZS44 - ZS56 (top to bottom)

Bottom Bracket Standard:

BSA

Shell Width:

73 mm

Chainstay Guide:

ISCG05

Brake Mount:

disc PM8 (direct mount 203 mm)

Front Derailleur Mount:

not possible

Rear Shock Eye-to-Eye Measurement:

185 mm

Rear Shock Stroke:

55 mm

Rear Shock Mounts:

Trunnion Mount

Bottle Cage Mounts:

1

Approved For:

Weight Limit:

130 kg (total weight), 120 kg (rider weight)

Rotor Size (max.):

203 mm (rear), 230 mm (front)

Tyre Size (max.):

29 x 2.6"

Note:

The tyre clearance must be checked with the fork fully compressed every time you change the tyre or the rim. It should be at least 8.5 mm all around.

Chainrings:

1x

Chainring Size (max.):

1x 36-tooth

Features:

• Fox 36 suspension fork with GRIP2 cartridge for adjusting high- and low-speed compression and rebound
• ÖHLINS TTX 2 Air shock
• sensitive, smooth suspension due to high transmission ratio at the beginning of the spring travel and use of cartridge bearings
• evenly decreasing gear ratio with approx. 15% progression at the end of the suspension travel
• low maintenance thanks to completely sealed pivot points
• dirt-resistant frame design
• ample tyre clearance
• maximum insertion depth for seatposts 205 mm (S), 230 mm (M), 255 mm (L), 280 mm (XL)
• externally routed cables for easy maintenance without chafing or rattling
• internal cable routing for seatpost in the seat tube possible
• an exchangeable brake mount with a rear disc brake adapter for 180 mm also allows installation of a 180 mm brake rotor
• adjustment of the chainstay length possible with inserts for the dropouts
• two threads on the top tube for attaching accessory bags or items such as a Wolf Tooth Components B-RAD Mini Strap Mount accessory holder

Geometry:

S:

Recommended Height:

158 - 170 cm

Stack:

608 mm

Reach:

420 mm

Seat Tube Length:

395 mm

Effective Top Tube Length:

561 mm

Head Tube Length:

100 mm

Chainstay Length:

440 mm

Wheelbase:

1172 mm

Bottom Bracket Height:

335 - 340 mm

BB Drop:

35 mm

Seat Tube Angle (effective):

74.5°

Seat Tube Angle (virtual):

77.5°

Head Tube Angle:

65.5°

M:

Recommended Height:

167 - 180 cm

Stack:

622 mm

Reach:

445 mm

Seat Tube Length:

420 mm

Effective Top Tube Length:

589 mm

Head Tube Length:

115 mm

Chainstay Length:

440 mm

Wheelbase:

1203 mm

Bottom Bracket Height:

335 - 340 mm

BB Drop:

35 mm

Seat Tube Angle (effective):

74.5°

Seat Tube Angle (virtual):

77.5°

Head Tube Angle:

65.5°

L:

Recommended Height:

177 - 190 cm

Stack:

636 mm

Reach:

470 mm

Seat Tube Length:

445 mm

Effective Top Tube Length:

619 mm

Head Tube Length:

130 mm

Chainstay Length:

445 mm

Wheelbase:

1240 mm

Bottom Bracket Height:

335 - 340 mm

BB Drop:

35 mm

Seat Tube Angle (effective):

74.5°

Seat Tube Angle (virtual):

77.5°

Head Tube Angle:

65.5°

XL:

Recommended Height:

186 - 199 cm

Stack:

649 mm

Reach:

495 mm

Seat Tube Length:

470 mm

Effective Top Tube Length:

648 mm

Head Tube Length:

145 mm

Chainstay Length:

450 mm

Wheelbase:

1276 mm

Bottom Bracket Height:

335 - 340 mm

BB Drop:

35 mm

Seat Tube Angle (effective):

74.5°

Seat Tube Angle (virtual):

77.5°

Head Tube Angle:

65.5°

Shipping Notice:

The shipment is carried out by a forwarding agent. The delivery time is 2-5 days in addition to the delivery time shown in the online shop.
For individual consultation, please contact our customer service team.

Contents:

• 1 x RAAW Mountain Bikes Jibb Frame
• 1 x Fox Racing Shox 36 Float GRIP2 Factory Boost suspension fork (not pre-assembled)
• 1 x ÖHLINS TTX 2 Air Shock (not pre-assembled)
• 1 x RAAW Mountain Bikes thru-axle
• 1 x Acros headset
• 1 x RAAW Mountain Bikes seatpost clamp
• 1 x RAAW Mountain Bikes PM8 disc brake adapter
• 2 x RAAW Mountain Bikes rear shock spacer
• 1 x RAAW Mountain Bikes rear shock axle
• 1 x protective film kit, matt
• 11 x cable ties
• 1 x sticker

RAAW Mountain Bikes GmbH
Fritz-Karl-Henkel-Str. 14
67454 Haßloch
Germany
ruben@raawmtb.com