Rohloff XXL Sprocket Remover Tool for CC 190 mm / A12 197 mm Hubs

Changing the sprocket and sprocket carrier: the Rohloff XXL Sprocket Remover Tool

The screw sprocket of the Rohloff Speedhub 500/14 is screwed onto the driver via a six-speed thread. To disassemble the screw sprocket with a chain whip, the driver must be held with the sprocket remover tool. In addition, the sprocket remover serves as a guide to screw the mounted splined carrier/plug-in sprocket unit onto the thread of the driver as far as it will go.
This version of the sprocket remover tool must be used with 190 mm (CC) and 197 mm (A12) oversize hubs.

Specifications:

Function:

removal of Rohloff Speedhub threaded sprockets, installation of the Splined Carrier and Splined Carrier S*

Compatibility:

190 mm, 197 mm Speedhub

Drive Size:

24 mm open-end wrench

* Note: The plug-in sprockets can be removed without a sprocket remover. It is only necessary to remove the circlip pliers with the help of a small screwdriver.

Manufacturer Number:

8509

Contents:

• 1 x Rohloff XXL sprocket remover tool
• 1 x Rohloff A12 adapter
• 1 x bolts