SRAM Code Ultimate Stealth Carbon Disc Brake

The Code Ultimate disc brake by SRAM in Stealth design with carbon lever

The Code disc brake from SRAM comes in the weight-reduced Ultimate variant with carbon levers and titanium hardware and is suitable for enduro and downhill trails with its powerful four pistons. The stealth design fits perfectly into your AXS cockpit and the brake caliper is a real eye-catcher. The brake lever housing has been optimised so that the hose runs closer to the handlebar. To adjust the brake to you and your habits, you set both the grip width and the pressure point. Thanks to SwingLink, you can control the power and tire out less quickly. The cartridge bearing at the lever pivot also contributes to this and offers a smooth braking feel.

Specifications:

Series:

Code

Application:

Enduro, Downhill, All Mountain

Type:

hydraulic, 4 pistons

Actuation:

DOT 5.1

Hose Length (Front/Rear):

950 mm / 2000 mm

Technical Information - Caliper:

Caliper Mount:

post mount

Pads:

sintered metal

Design:

two-part

Calliper Material:

aluminium

Piston Material:

composite

Hose Connection:

banjo

Technical Information - Lever:

Adjustment Options:

Grip width adjustment (tool-free), pressure point adjustment

Mount:

Matchmaker X

Design:

Flip-Flop (without specific side)

Brake Lever Material:

Carbon

Brake Lever Housing Material:

aluminium

Hose Connection:

straight

Features:

• powerful four-piston brake with carbon lever for Enduro and Gravity use
• Ultimate equipment: particularly light thanks to carbon levers and titanium screws on the brake calliper
• Stealth design to match AXS components
• with metallic brake pads for high braking force and durability
• brake hose closer to the handlebars due to optimised housing
• cartridge bearings at the lever pivot point for precision braking feel and low fatigue
• tool-free grip adjustment
• Contact Point Adjustment
• easy bleeding thanks to Bleeding Edge
• perfect dosage with SwingLink technology
• use of heat-resistant DOT 5.1
• forged aluminium caliper and brake lever housing
• recommended brake rotor 1-piece HS2

Technology:

Reach Adjust
The fit and ergonomics of the brake lever is a very personal matter. Riders have individual position preferences as well as unique hand sizes and finger lengths. With the reach adjustment, the lever can be easily adjusted - for maximum control with just one finger.

SwingLink™
If you pull the SRAM brake lever, you will notice the difference immediately. A shorter idle travel and optimized brake pad actuation. Due to the cam design, a shorter lever travel is necessary to push the brake pads towards the brake rotor. It's nice, but for perfect braking performance, it takes more than just power. Because you need control. Many braking systems offer a shorter stroke - but at the expense of modulation. SwingLink solves this problem with its special cam shape. When the brake pads touch the brake rotor, the force is modulated, thus avoiding the " on-off" brake feeling. This creates the perfect balance between power and precision.

Contact Point Adjustment
Some people like the immediate power transmission of a short lever travel. Others, however, prefer the feeling of a longer lever travel. With the contact point adjustment you can determine the position where your fingers should be when the brakes are actuated. This way, you can quickly and easily adjust the feel of your brakes without having to move the pads. In addition, both brake levers can be adjusted so that they feel exactly the same.

DOT 5.1
Heat is the enemy of every braking system. Through better heat management, your journey will also be much safer. It was found that DOT 5.1 takes three times longer to reach boiling point than DOT 4. This ensures smooth and undiminishing braking power under even more extreme conditions.

Bleeding Edge™
Bleeding Edge technology allows for quick and easy brake bleeding. Thanks to the special fluid channel and a specially designed bleed opening, the fluid can be pumped more easily through the brake caliper. A special adapter can be fitted to the bleed port and seals the system to prevent air ingress and fluid loss.

Manufacturer Numbers:

Front:

00.5018.194.000

Rear:

00.5018.194.001

Contents:

• 1 x SRAM Code Ultimate Stealth disc brake (front wheel or rear wheel)
• 1 x SRAM brake hose, 950 mm (front) or 2000 mm (rear)
• 1 x pair SRAM metal brake pads
• 1 x SRAM Matchmaker X clamps
• 1 x SRAM pad spacer
• 2 x bolts
• 2 x washers
• 1 x Torx key
• 1 x insert
• 1 x olive
• 1 x S-hook
• 1 x cable guide clip for stem mounting