Shimano WH-RS710-C32-TL Disc Center Lock Carbon Wheelset

Shimano WH-RS710-C32-TL Disc Center Lock Carbon wheelset - Strongest during sprints and on inclines

The Shimano WH-RS710-C32-TL is a road bike wheelset on 105 level with 32 mm full carbon rims for sprints and climbs. It combines Dura-Ace and Ultegra wheel technologies with a sleek design to allow for aerodynamics, a light weight and enough stiffness at an affordable price. The WH-RS710 has E-Thru thru-axle hubs with low-maintenance conical bearings for Center Lock brake rotors as well as a steel pawl freehub, which is compatible not only with 12-speed but also with conventional Shimano 11-speed road cassettes. The rims feature the wind tunnel-tested D2 design and have an inner width of 21 mm, so you can ride tyres up to 32 mm wide - and of course also as tubeless tyres. The wheelset is equipped with 24 double-butted bladed spokes with aluminium nipples at the front and rear.

Specifications:

Application:

Road

Wheel Size:

28"

Tyre Type:

clincher tyre

Number of Spokes:

24

Brake Type:

Center Lock Disc

Tubeless System:

TL/UST

Technical Information - Rim:

Type:

D2

Rim Flange:

with hook

Dimensions (ETRTO):

21-622

Inner Width:

21 mm

Outer Width:

28 mm

Depth:

32 mm

Valve Hole Diameter:

SV/Presta (6.5 mm)

Rim Material:

carbon (CFRP)

Technical Information - Front Hub:

Over Locknut Dimension:

12 x 100 mm thru-axle

Bearings:

cup & cone

Body Material:

aluminium

Technical Information - Rear Hub:

Over Locknut Dimension:

12 x 142 mm thru-axle

Bearings:

cup & cone

Body Material:

aluminium

Freehub Body Material:

steel

Freehub Body:

pawls

Technical Information - Lacing:

Front Lacing Pattern:

2-cross

Rear Lacing Pattern:

2-cross

Spoke Type:

J-bend / double butted (2.0-1.6-2.0) / bladed

Spoke Size:

281.5 mm / 283 mm (front l/r), 283 mm / 281.5 mm (rear l/r)

Spoke Material:

stainless steel

Nipple Material:

aluminium

Approved For:

Recommended Tyre Width:

25-622 to 32-622

Features:

• tubeless compatible wheelset with 32 mm full carbon rims for sprints and uphill rides
• aerodynamics, low weight and stiffness at an affordable price
• the simple design fits every road bike
• flat D2 profile, tested in the wind tunnel
• full compatibility with 12- and 11-speed cassettes
• aluminium hub axles
• polished bearings, CBN-finished, contact seals
• lacquered rims, anodised hub body

Technology:

D2 Rim
The shape of the Shimano D2 rims has been optimised with regard to both frontal winds and crosswinds. Extensive studies in the wind tunnel and on the road have shown that a wide rim profile with a deep rim well and flow angles of 0 to 15 degrees reduce drag the most. At the same time, this rim shape increases the lateral stiffness of the wheel and improves its vertical compliance, which provides more control, comfort and durability.

Cup and Cone Bearings
Angular contact ball bearings of the cup & cone type are superior to sealed cartridge bearings in terms of load carrying capacity, as they distribute lateral and vertical forces better, and thus run particularly smoothly and last a long time. They are also easier to adjust, maintain and replace.

E-Thru
E-Thru is a tool-free thru-axle system from Shimano that optimises the stiffness-to-weight ratio and ensures easy handling via its reliable internal cam mechanism. It is characterised by a high torsion resistance and thus also supports cornering at high speed. E-Thru thru-axle hubs and thru-axles are available in the corresponding over locknut dimensions for front and rear.

Colour Info:

black:

• Rims: black (carbon)
• Hub: black
• Spokes: black
• Nipples: black

Models:

28" set (front 12x100 + rear 12x142) Shimano:

Freehub:

Shimano Road

Gearing:

8-/9-/10-/11-/12-speed

Note:

The assembly of 8-/9-/10-speed cassettes on a Shimano Road Rotor requires a 1.85 mm spacer.

Manufacturer Number:

EWHRS710C32LFERED

Contents:

• 1 x Shimano WH-RS710-C32-TL wheelset (front & rear)
• 2 x tubeless rim tape (applied)