Shotgun Pro Front Child Seat for MTB and Pro Handlebars Complete Set

Guidelines for Replacing E-bike Components:

Before you replace components on your e-bike, please read through the guidelines for component replacement for CE-marked e-bikes/pedelecs with pedal assistance.

Specifications:

Pro Front Child Seat for MTB:

Application:

Kids, All Mountain

Mount:

front seat

Wheel Size:

26" , 27.5" , 29"

Mount:

Mounting on seatpost and steerer tube

Pro Handlebars:

Width:

355 mm

Compatibility:

Bikes:

• (E-)mountain bikes with suspension fork and Ahead stem
• steerer tubes with 1 1/8" diameter
• required space on the steerer tube: 10 mm
• required clearance to the front below the stem: 46 mm (from the centre of the steerer tube)
• regular and dropper seatposts with 27.2 mm, 30.9 mm, 31.6 mm and 34.9 mm diameter
• required clearance at the seatpost: 14 mm
• full suspension bikes, function of the damper is not affected

Handlebars:

• flat or riser handlebars with 31.8 mm or 35 mm diameter
• stem with maximum 60 mm clamp width

Note: Cockpits with Trek Knock Block or Syncros 1.5 headsets require special adapters, which are not included.

Approved For:

Recommended Age:

2 - 5 years

Weight Limit:

27 kg

Features:

• set of Pro front child seat and Pro handlebars for mountain bike tours with your child
• lets children actively participate in steering/riding
• teaches the basics of mountain biking such as balance and turning
• kids' handlebars with rubber grips for better hold and a more upright seat position
• handlebar distance, leg distance, leg length, foot angle and saddle angle adjustable
• seat and handlebars are quickly attached and removed thanks to the clamp system
• can be mounted on full-suspension bikes, hardtails and E-mountain bikes
• no contact with the frame
• rubber handlebar clamp inserts for various diameters
• two stem spacers included for quickly changing between bikes
• seat folds flat for storage between tours

A Note Regarding Use in Street Traffic:

The Shotgun front child seat for MTB is intended for off-road use. Road use is not recommended.

Safety instructions from the manufacturer:

Prerequisites:

• The seat requires the active participation of the child and is not suitable for children under 2 years of age or children who cannot stay awake and sit independently for the entire length of the tour.
• Make sure that your child does not exceed the weight limit of 27 kg and that the distance between feet and front wheel is large enough.
• When riding, you and your child should always wear an appropriate helmet.
• Your child should wear closed-toe shoes and clothing appropriate for the weather. Since they move less, they should always be dressed warmer than you are. Also, make sure that clothing does not get caught in moving parts of the bike.

Handling:

• Check the seat's attachment before each ride. If the seat is damaged, you should not use it.
• Only use the Shotgun front child seat if your bike, including brakes and tyres, is in perfect condition. Make sure that there are no sharp or pointed parts on your bike that could injure your child.
• Never leave your bike unattended with a child in the seat.
• The use of the child seat reduces the manoeuvrability of the bicycle. Balance, steering and braking are affected. Always ride slowly, carefully and within your abilities.
• The front child seat is not suitable for racing, stunts, jumps, drop-offs or advanced trails.
• Riders and passengers should have both hands on the handlebars at all times to avoid accidents.
• Use at your own risk.

Installation:
Before you install and use the kids seat, read the installation instructions and all the provided fit and safety information carefully.

If you have any questions about the product, assembly or handling, please do not hesitate to contact our service.

Manufacturer Number:

KRS-PCOMBO

Contents:

• 1 x Shotgun Pro front child seat for MTB
• 1 x Shotgun Pro handlebars for front child seat
• 1 x Shotgun Pro front child seat bar for MTB
• 2 x legs
• 2 x footrests
• 2 x foot straps
• 2 x handlebar clamps
• 4 x handlebar clamp inserts
• 2 x 10 mm steerer tube spacers
• 1 x clamping ring for 27.2 mm seatpost
• 2 x seat clamp inserts, medium
• 2 x seat clamp inserts, large
• 1 x seat clamp insert, rear
• 1 x mudguard
• 4 x zip ties
• 2 x hex bolts for footrests
• 2 x thumb bolts
• 4 x hex bolts for sadle
• 3 x hex tool

Order Together:

• Adapter for Syncros 1.5 Headsets
• Adapter for Trek Knock Block Headsets