Specialized Epic 8 Expert Carbon 29" Mountain Bike
Information regarding the return of batteries and electrical equipment:
Information on the return and disposal of used batteries and electrical equipment can be found here.Specifications:
- Application:
- Cross Country
- Wheel Size:
- 29"
- Front Travel:
- 120 mm
- Rear Travel:
- 120 mm
- Sizes:
- S, M, L, XL
- Front Triangle Material:
- carbon (11m)
- Rear Triangle Material:
- carbon (11m)
Components:
- Frame:
- FACT 11m carbon, progressive XC race geometry, internal cable routing, 12 x 148 mm Boost
- Fork:
- RockShox SID Select+, Charger 2 RL damping, DebonAir, 44 mm offset, 114 mm trail, 15 x 110 mm Boost
- Stem:
- Specialized XC, aluminium, 4 bolts, 6° Rise
- Handlebars:
- Specialized, aluminium, 10 mm rise, 31.8 mm clamp
- Grips:
- SRAM Slip-On, Twistloc
- Rear Shock:
- RockShox SIDLuxe Select+, Rx XC Tune, Two Position, Rebound Adjust, 190 x 40 mm
- Remote System:
- none
- Headset:
- Specialized S142500003 (1 1/8" top, 1.5" bottom, IS)
- Seatpost:
- X-Fusion Manic, 0 mm setback, 30.9 mm, stroke: 100 mm (XS) / 125 mm (S, M), 150 mm (L, XL)
- Saddle:
- Specialized Body Geometry Power Expert, width: 155 mm (XS - S), 143 mm (M - XL)
- Crank:
- SRAM GX Eagle Alloy DUB, SRAM DUB BSA 73 mm bottom bracket, 34 T chainring
- Pedals:
- none
- Brakes:
- SRAM Level, hydraulic disc brake, 4 pistons, 180 mm/160 mm
- Shift Lever:
- SRAM AXS POD Controller, 12-speed
- Rear Derailleur:
- SRAM GX Eagle AXS Transmission, 12-speed
- Cassette:
- SRAM XG-1275, 12-speed, 10-52 t
- Chain:
- SRAM GX Eagle, 12-speed
- Rims:
- Roval Control, Carbon Offset Design, 29 mm jaw width, 4 mm hook width, tubeless ready, 28 holes
- Spokes:
- DT Swiss Competition Race, straight pull
- Front Hub:
- DT Swiss 350, straight pull, 6-bolt Disc, 28 holes, thru-axle
- Rear Hub:
- DT Swiss 350, straight pull, 6-bolt Disc, DT Swiss Ratchet, SRAM-XD freehub, 28 holes, thru-axle
- Front Tyre:
- Specialized Fast Trak, Control carcass, T7 rubber compound, 29 x 2.35"
- Rear Tyre:
- Specialized Renegade, Control carcass, T5 rubber compound, 29 x 2.35"
Approved For:
- Weight Limit:
- 127 kg (rider + gear)
- Rotor Size (max.):
- 180 mm (rear)
- Tyre Size (max.):
- 29 x 2.4"
- Chainrings:
- 1x
- Chainring Size (max.):
- 1x 38-tooth
Features:
- 29-inch cross-country full-suspension bike with electronic SRAM gears
- competition-ready speed uphill and downhill
- ride characteristics adjustable via flip chip (steerer tube angle by 0.5°, bottom bracket by 6 mm)
- suspension fork with Charger 2 RL with two-position compression adjustment designed for pedalling efficiency
- easy tuning and consistent feel throughout the travel thanks to DebonAir spring
- rear shock with frame-matched Rx Tune
- seatpost with infinitely adjustable stroke
- handmade wheels from the Roval Specialized World Cup line for maximum stiffness, ride quality and durability with minimum weight
- internal cable routing
- 34.9 mm aluminium seat clamp
- standard tubes with Presta valve
- SRAM UDH universal derailleur hanger
Technology:
FACTFACT is an acronym for " Functional Advanced Composite Technology" and summarises all the know-how that Specialized has in the use of carbon fibre. It is a holistic approach, which primarily concerns the bike frames, but is found in many components such as handlebars, stems, saddles etc. The starting point is always the awareness for the needs of riders and the capability to fulfil them. Next, the selection of fibres, resins and fabric layers takes place; in this process the quality of the carbon and the arrangement of the fibre layers play an important role. It is important to find the right set-up for the project at hand and the intended location or rather the area of application. It is often necessary to differentiate from model to model at several points. In the final step, attention is paid to processing the material in a way that allows the desired advantages in terms of low weight, rigidity and stability to be achieved.
Rider-First Engineered
Rider-First Engineered describes the design approach used by Specialized to precisely match each frame size to the target group. Simply put, smaller frames for smaller riders are built in a different way than larger frames for larger riders. This is done on the basis of performance parameters determined in practical tests, taking into account the forces acting on different areas of the bike when riders of different sizes ride it. Based on this analysis, the optimum tube dimensions and the appropriate carbon fibre covering for the respective frame size are determined. This way you can be sure that no matter what your height is, you will receive a bike that delivers optimal and controllable performance suited to your size.
Geometry:
(based on a fork axle to crown length of 530 mm and low bottom bracket height)XS:
- Stack:
- 603 mm
- Reach:
- 390 mm
- Seat Tube Length:
- 370 mm
- Effective Top Tube Length:
- 535 mm
- Head Tube Length:
- 92 mm
- Chainstay Length:
- 435 mm
- Wheelbase:
- 1117 mm
- Bottom Bracket Height:
- 323 mm
- BB Drop:
- 52 mm
- Seat Tube Angle:
- 76.5°
- Head Tube Angle:
- 65.9°
- Standover Height:
- 376 mm
- Stem Length:
- 60 mm
- Handlebar Width:
- 760 mm
- Crank Arm Length:
- 165.0 mm
- Wheel Size:
- 29"
S:
- Stack:
- 597 mm
- Reach:
- 420 mm
- Seat Tube Length:
- 390 mm
- Effective Top Tube Length:
- 569 mm
- Head Tube Length:
- 92 mm
- Chainstay Length:
- 435 mm
- Wheelbase:
- 1147 mm
- Bottom Bracket Height:
- 329 mm
- BB Drop:
- 46 mm
- Seat Tube Angle:
- 76°
- Head Tube Angle:
- 65.9°
- Standover Height:
- 383 mm
- Stem Length:
- 60 mm
- Handlebar Width:
- 760 mm
- Crank Arm Length:
- 170.0 mm
- Wheel Size:
- 29"
M:
- Stack:
- 598 mm
- Reach:
- 450 mm
- Seat Tube Length:
- 410 mm
- Effective Top Tube Length:
- 605 mm
- Head Tube Length:
- 95 mm
- Chainstay Length:
- 435 mm
- Wheelbase:
- 1179 mm
- Bottom Bracket Height:
- 326 mm
- BB Drop:
- 44 mm
- Seat Tube Angle:
- 75.5°
- Head Tube Angle:
- 65.9°
- Standover Height:
- 388 mm
- Stem Length:
- 60 mm
- Handlebar Width:
- 760 mm
- Crank Arm Length:
- 170.0 mm
- Wheel Size:
- 29"
L:
- Stack:
- 610 mm
- Reach:
- 475 mm
- Seat Tube Length:
- 450 mm
- Effective Top Tube Length:
- 633 mm
- Head Tube Length:
- 110 mm
- Chainstay Length:
- 435 mm
- Wheelbase:
- 1210 mm
- Bottom Bracket Height:
- 333 mm
- BB Drop:
- 42 mm
- Seat Tube Angle:
- 75.5°
- Head Tube Angle:
- 65.9°
- Standover Height:
- 397 mm
- Stem Length:
- 60 mm
- Handlebar Width:
- 760 mm
- Crank Arm Length:
- 175.0 mm
- Wheel Size:
- 29"
XL:
- Stack:
- 628 mm
- Reach:
- 500 mm
- Seat Tube Length:
- 500 mm
- Effective Top Tube Length:
- 662 mm
- Head Tube Length:
- 130 mm
- Chainstay Length:
- 435 mm
- Wheelbase:
- 1243 mm
- Bottom Bracket Height:
- 333 mm
- BB Drop:
- 42 mm
- Seat Tube Angle:
- 75.5°
- Head Tube Angle:
- 65.9°
- Standover Height:
- 402 mm
- Stem Length:
- 60 mm
- Handlebar Width:
- 760 mm
- Crank Arm Length:
- 175.0 mm
- Wheel Size:
- 29"
Manufacturer Number:
90324Shipping Notice:
The shipment is sent pre-assembled by a forwarding agent.The delivery time is extended by 2-5 days, depending on the overall volume of orders.
For individual consultation, please contact our customer service team.
Contents:
- 1 x Specialized Epic 8 Expert 29" Mountain Bike
Weight:
- red sky-white/M: 11,1 kg
- 100 day return period
- Online since 1998