Syntace P6 Carbon HiFlex Di2 Ready Seatpost

Feel the difference: the P6 Carbon HiFlex Di2 Ready Seatpost by Syntace

The Syntace P6 Carbon HiFlex Di2 Ready seatpost delivers twice as much shock absorption in the direction of travel during fast impacts as before. Without losing chassis control, with better vibration damping and directional stability of the bike even in corner drifts and ruts. Compared to the previous Syntace P6 Carbon, a further noticeable increase in comfort as well as a slight bob-damping chassis stabilisation for bikes with rear suspension.

Specifications:

Application:

Cyclocross, All Mountain, Downhill, Enduro, Gravel

Diameter:

27.2 mm, 30.9 mm, 31.6 mm

Length:

400 mm

Setback:

0 mm

Technical Information:

Clamp:

2-bolt clamp

Compatible Saddle Rails:

7 x 7 mm (standard), 7 x 9 mm (oval), 7 x 10 mm (oval)

Material:

carbon, titanium (bolts)

Approved For:

Weight Limit:

130 kg total weight

Insertion Depth (min.):

90 mm (140 mm for Ø 27.2 mm)

Compatibility:

High oval carbon seatposts with up to 11 mm are compatible with the P6 Carbon HiFlex seatpost. You just have to make sure that the bolts are still screwed into the nuts at least 6 turns (= 6 mm deep) when using the maximum angle adjustment range of the seatpost head. If this is not possible at one of the two adjustment screws, use the M6x35 titanium screw together with the Syntace half moon washer instead of the original M6x30 titanium screw.

Features:

• continuous, statically perfect micro-adjustment: The 2-fold screw clamp is a precise angle adjustment option. With the P6, Syntace combines this principle with the best bolt accessibility and 30° swivel range.
• super slim 30 mm clamp top on the top: The Syntace Extended Seat Adjustment offers massive adjustment travel back and forth. The further back the stopper limiting the adjustment travel is, the further you can push your saddle back.
• extra-wide 52 mm support on the underside: The asymmetrically extended Syntace saddle support, Extended Rail Support, provides a large support surface for the saddle rail. With this boom, which is pulled strongly backwards, you can also ride light titanium or carbon saddle rails off-road without them bending or breaking prematurely.
• long adjustment travel
• carbon head seamlessly connected with high carbon shaft
• Di2 ready (compatible with Shimano Di2 battery)
• total length 400 mm and useable length 350 mm

Manufacturer Numbers:

carbon matt / 31.6 mm / 400 mm / SB 0 mm:

142411

carbon matt / 27.2 mm / 400 mm / SB 0 mm:

142381

carbon matt / 30.9 mm / 400 mm / SB 0 mm:

142398

Contents:

• 1 x Syntace P6 Carbon HiFlex Di2 ready seatpost