crankbrothers Highline 7 100 mm Dropper Post

The Highline 7 100 mm dropper post by crankbrothers - with a 2-chamber system

The crankbrothers Highline 7 seatpost in the 100 mm travel version is a dropper post with continuous adjustment. It impresses with its smooth operation, returns to its original position without delay and is also very easy to install. The basis is a self-contained hydraulic IFP cartridge with two chambers and internal floating piston. Thanks to the 2-bolt clamp with quick release head, the saddle can be replaced quickly. The whole thing is rounded off by a Jagwire cable, Igus bearings and Trelleborg seals of the highest quality. Thanks to its extremely low overall height, low weight and clean internal cable routing, the Highline 7 will cause a sensation in the world of cross-country racing and trail riding.

Specifications:

Application:

Cross Country

Travel:

100 mm

Diameter:

30.9 mm, 31.6 mm

Length:

367 mm

Setback:

0 mm

Technical Information:

Actuation:

mechanical handlebar remote

Cable Routing:

internal

Clamp:

2-bolt clamp

Compatible Saddle Rails:

7 x 7 mm (standard)

Material:

aluminium (7075-T6)

Approved For:

Insertion Depth (max.):

217 mm

Insertion Depth (min.):

100 mm

Features:

• lower insertion depth suitable for many frames
• premium seals by Trelleborg
• exclusive plain bearings by Igus
• Jagwire cable and cable housing
• encapsulated hydraulic cartridge (2 chambers: gas and oil separately) with internal floating piston
• internal cable routing
• quick connection mechanism for easy cable installation
• linear actuator for quick return
• quill made of machine weight-reduced aluminium (10-15 g less than Highline 3)
• standard 2-bolt clamp w/ quick release
• 47 mm minimum construction height
• 237 mm maximum extension length
• 147 mm minimum extension length
• remote with especially flexible mount system available separately

Maintenance Intervals:
The maintenance intervals are dependent on riding style and geographical location.
After every ride: Wipe dust and dirt from the seatpost, focusing on the seal area and the tip of the coil spring. Check the seatpost for any damage.
Every 150-175 hours of riding time: Lubricate the internal components by unscrewing the collar, use coil-specific grease (never oil!) up to the sleeve under the collar and reassemble. Check screw connections for the specified torques.
450+ hours riding time: Check seatpost and replace internal components if necessary.

Models:

30.9 mm / 367 mm / SB 0 mm:

Diameter:

30.9 mm

Length:

367 mm

Setback:

0 mm

Manufacturer Number:

16378

31.6 mm / 367 mm / SB 0 mm:

Diameter:

31.6 mm

Length:

367 mm

Setback:

0 mm

Manufacturer Number:

16379

Contents:

• 1 x crankbrothers Highline 7 100 mm dropper post
• 1 x Jagwire cable
• 1 x Jagwire cable housing

Order Together:

The remote kit is required for use.