crankbrothers Highline XC/Gravel 60 mm Dropper Post

The Highline XC/Gravel 60 mm dropper post by crankbrothers - Perfect for your gravel bike

The crankbrothers Highline XC/Gravel dropper post with 60 mm of travel and 27.2 mm diameter is a dropper for your MTB, cyclocross or gravel bike. It impresses with its infinite adjustment, smooth function, quick return and easy installation. The basis is a self-contained hydraulic IFP cartridge with two chambers and internal floating piston. The Jagwire cable, Igus bearings and Trelleborg seals stand for the best quality. With its low overall stack and clean internal cable routing, the Highline XC/Gravel will soon accompany you on all your off road adventures.

Specifications:

Application:

Gravel, Cyclocross, Cross Country

Travel:

60 mm

Diameter:

27.2 mm

Length:

297 mm, 387 mm

Setback:

0 mm

Technical Information:

Actuation:

mechanical handlebar remote

Cable Routing:

internal

Clamp:

2-bolt clamp

Compatible Saddle Rails:

7 x 7 mm (standard)

Material:

aluminium (7075-T6)

Approved For:

Insertion Depth (max.):

174 mm (297 mm), 264 mm (387 mm)

Insertion Depth (min.):

100 mm (297 mm), 100 mm (387 mm)

Features:

• lower insertion depth suitable for many frames
• premium seals by Trelleborg
• exclusive plain bearings by Igus
• Jagwire cable and cable housing
• encapsulated hydraulic cartridge (2 chambers: gas and oil separately) with internal floating piston
• internal cable routing
• quick connection mechanism for easy cable installation
• linear actuator for quick return
• aluminium quill
• standard 2-bolt clamp
• 47 mm minimum construction height
• remote with especially flexible mount system available separately

Maintenance Intervals:
The maintenance intervals are dependent on riding style and geographical location.
After every ride: Wipe dust and dirt from the seatpost, focusing on the seal area and the tip of the coil spring. Check the seatpost for any damage.
Every 150-175 hours of riding time: Lubricate the internal components by unscrewing the collar, use coil-specific grease (never oil!) up to the sleeve under the collar and reassemble. Check screw connections for the specified torques.
450+ hours riding time: Check seatpost and replace internal components if necessary.

Models:

27.2 mm / 297 mm / SB 0 mm:

Diameter:

27.2 mm

Length:

297 mm

Setback:

0 mm

Manufacturer Number:

16489

27.2 mm / 387 mm / SB 0 mm:

Diameter:

27.2 mm

Length:

387 mm

Setback:

0 mm

Manufacturer Number:

16490

Contents:

• 1 x crankbrothers Highline XC/Gravel 60 mm dropper post
• 1 x Jagwire cable
• 1 x Jagwire cable housing

Order Together:

The remote kit is required for use.